看了网上的一些handler原理分析，是从源码级别直接看的。但是总觉得没有从实战上分析吗，感觉有点蹩脚。这篇文章算是自己分析的，也参考了《android开发艺术探索》，还有网上的一些其他资料，如有侵权请私信
先来举个栗子吧
一般在使用handler的时候，用其来更新UI，也就是说在主线程进行更新界面操作，当时子线程请求网络数据，如此handler刚好派上用场。先看实例吧
public class MainActivity extends Activity {
private TextView text; private Handler handler = new Handler() {
@Override
public void handleMessage(Message msg) { switch (msg.what) { case 1:
text.setText("使用Handler更新了界面"); break;
}
}
};
@Override
protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState);
setContentView(R.layout.activity_main);
text = (TextView) findViewById(R.id.id_text);
new Thread("#Thread1") {
@Override
public void run() { //...你的业务逻辑；
Message message = new Message();//发送一个消息，该消息用于在handleMessage中区分是谁发过来的消息；
message.what = 1;
handler.sendMessage(message);
}
}.start();
}
}以上的例子呢，应该算是handler使用的最普遍的，当然还有其它用法，handler创建在主线程中，也就是Activitythread，在"#Thread1"中执行耗时操作，在主线程中更新UI，创建handler。
在创建handler之前需要注意：
在创建handler之前，必须先在相同线程内创建一个Looper，每个线程中最多只能有一个 Looper 对象，由 Looper 来管理此线程里的 MessageQueue (消息队列)。
如果不在主线程创建handler的话，应该这么写代码:
new Thread("Thread#2"){@override
public void run(){
Looper.prepare();
Handler handler = new Handler();
Looper.loop();
}
}首先利用Looper.prepare()创建looper，然后创建handler，然后调用Looper.loop()开启消息循环。这是在非UI线程，但是我们在之前的handler使用例子中并未简单looper的创建啊，其实looper 已经在activityThread当中给你创建完了。可以来看看源码
public static void main(String[] args) {
、、、、、此处省略部分代码
Process.setArgV0("<pre-initialized>");
Looper.prepareMainLooper();
ActivityThread thread = new ActivityThread();
thread.attach(false); if (sMainThreadHandler == null) {
sMainThreadHandler = thread.getHandler();
}
AsyncTask.init(); if (false) {
Looper.myLooper().setMessageLogging(new
LogPrinter(Log.DEBUG, "ActivityThread"));
}
Looper.loop(); throw new RuntimeException("Main thread loop unexpectedly exited");
}可以看出activitythread执行了两个looper方法
Looper.prepareMainLooper(); Looper.loop();
所以我们只需要创建handler就可以了。那我们接着看我们文章开头那个实例，重写了handler的handlemessage方法，然后新建线程，利用handler发送消息。然后主线程的handler就会接收到消息，并在handlemessage中处理消息。上面整体思路没问题吧，这也是最初在使用handler的时候，大家的通常思维，那handler到底是怎么切换线程的，从thread1切换到了主线程？？？
先上一张整体的流程图
handler消息机制.png
这张图是我自己画的，可能画的不太好，也看了一些大佬的流程图，毕竟我基础差，总觉得他们的图理解起来不是很容易。
MessaggeQueue类详解
根据我们的操作先来看啊，主线程已经准备就绪，handler创建完了，然后调用sendmessage方法，最后调用的事enqueuemessage()方法，然后就到了messgaeQueue类，这个类又是从哪来的呢？？？？这个类其实是从Looper里面蹦出来的，在创建Looper的时候，就会生成MessageQueue,来看一下源码
private static void prepare(boolean quitAllowed) { if (sThreadLocal.get() != null) { throw new RuntimeException("Only one Looper may be created per thread");
}
sThreadLocal.set(new Looper(quitAllowed));
} /**
* Initialize the current thread as a looper, marking it as an
* application's main looper. The main looper for your application
* is created by the Android environment, so you should never need
* to call this function yourself. See also: {@link #prepare()}
*/
public static void prepareMainLooper() {
prepare(false); synchronized (Looper.class) { if (sMainLooper != null) { throw new IllegalStateException("The main Looper has already been prepared.");
}
sMainLooper = myLooper();
}
}我们知道在主线程的main函数中，已经调用了prepareMainLooper()方法，而后prepareMainLooper()方法又调用了 prepare()方法,在这个方法里面，我们调用looper的构造函数，并将新建的looper存入到了ThreadLocal里面（ThreadLocal后边讲），然后我们来看这个looper的构造函数
private Looper(boolean quitAllowed) {
mQueue = new MessageQueue(quitAllowed);
mThread = Thread.currentThread();
}可以清晰的看到Looper在构造函数中创建了MessageQueue,知道了MessageQueue的由来，我们简单来说一下MessageQueue这个类啊
enqueueMessage()：这个是通过维护一个单链表，handler添加消息以后，MessageQueue会将消息添加到最后。
next():用于取出消息，并将消息传递给Looper 。注意这个next方法很重要，是个死循环，当没有消息的时候会一直阻塞在这里，直到有消息会将消息传递出去,代码如下，不用看的很详细。
Message next() { // Return here if the message loop has already quit and been disposed.
// This can happen if the application tries to restart a looper after quit
// which is not supported.
final long ptr = mPtr; if (ptr == 0) { return null;
} int pendingIdleHandlerCount = -1; // -1 only during first iteration
int nextPollTimeoutMillis = 0; for (;;) { if (nextPollTimeoutMillis != 0) {
Binder.flushPendingCommands();
}
nativePollOnce(ptr, nextPollTimeoutMillis); synchronized (this) { // Try to retrieve the next message. Return if found.
final long now = SystemClock.uptimeMillis();
Message prevMsg = null;
Message msg = mMessages; if (msg != null && msg.target == null) { // Stalled by a barrier. Find the next asynchronous message in the queue.
do {
prevMsg = msg;
msg = msg.next;
} while (msg != null && !msg.isAsynchronous());
} if (msg != null) { if (now < msg.when) { // Next message is not ready. Set a timeout to wake up when it is ready.
nextPollTimeoutMillis = (int) Math.min(msg.when - now, Integer.MAX_VALUE);
} else { // Got a message.
mBlocked = false; if (prevMsg != null) {
prevMsg.next = msg.next;
} else {
mMessages = msg.next;
}
msg.next = null; if (false) Log.v("MessageQueue", "Returning message: " + msg); return msg;
}
} else { // No more messages.
nextPollTimeoutMillis = -1;
} // Process the quit message now that all pending messages have been handled.
if (mQuitting) {
dispose(); return null;
} // If first time idle, then get the number of idlers to run.
// Idle handles only run if the queue is empty or if the first message
// in the queue (possibly a barrier) is due to be handled in the future.
if (pendingIdleHandlerCount < 0
&& (mMessages == null || now < mMessages.when)) {
pendingIdleHandlerCount = mIdleHandlers.size();
} if (pendingIdleHandlerCount <= 0) { // No idle handlers to run. Loop and wait some more.
mBlocked = true; continue;
} if (mPendingIdleHandlers == null) {
mPendingIdleHandlers = new IdleHandler[Math.max(pendingIdleHandlerCount, 4)];
}
mPendingIdleHandlers = mIdleHandlers.toArray(mPendingIdleHandlers);
} // Run the idle handlers.
// We only ever reach this code block during the first iteration.
for (int i = 0; i < pendingIdleHandlerCount; i++) { final IdleHandler idler = mPendingIdleHandlers[i];
mPendingIdleHandlers[i] = null; // release the reference to the handler
boolean keep = false; try {
keep = idler.queueIdle();
} catch (Throwable t) {
Log.wtf("MessageQueue", "IdleHandler threw exception", t);
} if (!keep) { synchronized (this) {
mIdleHandlers.remove(idler);
}
}
} // Reset the idle handler count to 0 so we do not run them again.
pendingIdleHandlerCount = 0; // While calling an idle handler, a new message could have been delivered
// so go back and look again for a pending message without waiting.
nextPollTimeoutMillis = 0;
}
}Looper类详解
我们这时候来看看looper，looper是在主线程的，刚刚说过了，looper在handler创建之前就已经创建完成了，顺带把MessageQueue和looper.loop()方法都执行了。这时候我们来看看这个loop方法是干嘛地
public static void loop() { final Looper me = myLooper(); if (me == null) { throw new RuntimeException("No Looper; Looper.prepare() wasn't called on this thread.");
} final MessageQueue queue = me.mQueue; // Make sure the identity of this thread is that of the local process,
// and keep track of what that identity token actually is.
Binder.clearCallingIdentity(); final long ident = Binder.clearCallingIdentity(); for (;;) {
Message msg = queue.next(); // might block
if (msg == null) { // No message indicates that the message queue is quitting.
return;
} // This must be in a local variable, in case a UI event sets the logger
Printer logging = me.mLogging; if (logging != null) {
logging.println(">>>>> Dispatching to " + msg.target + " " +
msg.callback + ": " + msg.what);
}
msg.target.dispatchMessage(msg); if (logging != null) {
logging.println("<<<<< Finished to " + msg.target + " " + msg.callback);
} // Make sure that during the course of dispatching the
// identity of the thread wasn't corrupted.
final long newIdent = Binder.clearCallingIdentity(); if (ident != newIdent) {
Log.wtf(TAG, "Thread identity changed from 0x"
+ Long.toHexString(ident) + " to 0x"
+ Long.toHexString(newIdent) + " while dispatching to "
+ msg.target.getClass().getName() + " "
+ msg.callback + " what=" + msg.what);
}
msg.recycleUnchecked();
}
}和上面next方法一样，这块也是个死循环，一直在等待messagequeue的消息。等它拿到消息以后，就会调用msg.target.dispatchMessage(msg);这行代码，这行代码其实就是调用了handler的dispatchMessage方法，后边经过一些列的判断会调用handler的handleMessage()方法。这是整体过程。
总结
下面从别的文章上抄来的图，简单粗暴。很明显就能看出如何切换线程的，首先主线程就相当于A线程，B线程就相当于#Thread1
POST就相当于在thread1里面使用handler发送消息，然后把消息放在messageQueue当中，主线程里面的Looper就回调用loop方法，一直从messagequeue类的next方法中获取消息，然后再次调用handler消化这个消息。
作者：上官若枫
链接：https://www.jianshu.com/p/683f8858f8a5
共同學習，寫下你的評論
評論加載中...
作者其他優質文章
